RECHARGEABLE TORCH

Product Overview
The Wolf Rechargeable Torch is an ATEX and IECEx certified rechargeable right angle safety torch, using the latest technology to give excellent performance, robustness and reliability for safe use in Zones 1 and 2 potentially explosive gas and 21 and 22 dust atmospheres (R-50). Zones 0 and 20 version available (R-55).
This high strength right-angle torch is extremely robust and reliable, with proven shock protection, even at sub zero temperatures, rubber armoured lens ring and end cap, scratch and chemical attack resistance lens, with a certified IP67 enclosure.
The compact, lightweight and ergonomic torch body gives enhanced grip and comfort for the user with easy single-handed switching, even with gloved hands, plus the replaceable high strength clip allows for hands free use.
Unique optics deliver a piercing beam of outstanding light from a high power LED, and using the latest rechargeable battery technology provides a light duration of up to 6.5hrs on low power and 3.5hrs on high power.
The low battery power indicator allows a user to monitor the state of battery charge as it diminishes, a bar of high intensity red LEDs go out and finally the beam flashes repeatedly, warning recharging is required.
Plus its emergency function illuminates the torch if power to the charger is cut to provide standby escape lighting.
Optional primary cell cassette is available for back-up power.
The torch is low maintenance with quick and easy parts replacement, a full spares service is offered for all internal/external fittings, and the LED light source is expected to last the product’s lifetime.
Vehicle and mains voltage charger options offer a rapid recharge time of only 1.5hrs for 90% capacity, plus the mountable ‘quick’ charger is configured as a torch holder, with ‘snap in/snatch out’ function, for quick release but secure retention.

Features & Benefits
• ATEX and IECEx certified for Zones 1 and 21, plus Zones 0 and 20 version available
• High power LED for outstanding light output
• Compact and lightweight ergonomic torch design
• Two power levels of light output give up to 6.5 hours light duration
• Rechargeable battery with low power indicator
• Supplied with wrist strap and clip ring
• Emergency illumination function
• Mains and vehicle charger options
• Suitable for cyclic and short and long term standby applications
• Very low maintenance, quick and easy parts replacement

Accessories

THE RC-200H/L CHARGERS ARE FOR USE WITH ALL TORCHES IN THE WOLF RECHARGEABLE TORCH RANGE.
The Lithium Ion battery is charged within the torch via charging studs on the side.
The chargers are designed to hold the torch while charging, using a ‘snap in/snatch out’ function, for quick release but secure retention, even in vehicle applications, enabling them to always be ready for use.
The RC-200L incorporates the RC-200 charger with the RC-452 DC supply cable for use at low voltages of 12-24VDC for vehicle applications.
The RC-200H incorporates the RC-212 charger with the RC-300 plug-top mains adaptor for use at mains voltages of 100VAC to 230VAC or at 254VAC, 60Hz ‘rig voltage’.
The mains adaptor is supplied with pin configurations for UK, EU, US and Australia.
All chargers may be used free standing or can be bench or wall mounted.

THE WOLF RECHARGEABLE TORCH CHARGER BANK PROVIDES A SOLUTION TO CHARGER MOUNTING AND SPACE MANAGEMENT AS THE 100-254VAC OR 12-24VDC BANKING SYSTEM ALLOWS EASY RECHARGING AND STORAGE FOR THE WOLF RECHARGEABLE TORCH RANGE.
Installation is simple and quick; all mounting points are linear adjustable providing extra flexibility in tight areas.
There is only one electrical connection to the Charger Bank helping keep wiring and cable running tidy and quick.
The Charger Bank is produced from lightweight anodized aluminium with fine grade stainless steel/chrome fixings for long life.
Operationally the Charger Bank will provide quick charging times for each torch of 90% charge in 1.5 hours and 100% full charge in 3 hour.
In vehicle applications, this unit exceeds the requirements of EN1789:2000 6.3.5 (Medical Vehicles and their equipment) giving torch retention in shock conditions of up to 40G (EN1789 requires 15G).
The chargers are CE marked in compliance with the 2004/108/EC EMC directive and comply with the requirements of 2006/28/EC Automotive EMC directive for use in emergency vehicles.
The Charger Bank is designed for indoor and internal vehicle use and can be mounted in a number of orientations.
The torch indicates state of charge; the charger base indicates power to input.