PetroWrap Anti-Corrosion Tape

PetroWrap Anti-Corrosion Tape System is the superior way to protect your deck equipment, hydraulics, steel pipes, flanges, valves, marine pilings and structures, or any other equipment which is subject to corrosion.

Composed mainly of petrolatum and specific anti-corrosion agents, PetroWrap is formulated to provide economical long-term protection from water, salt, alkalis, and acids and requires no maintenance.

PetroWrap Anti-Corrosion Tape System is available in both Marine and Industrial versions.

For marine use

PetroWrap Anti-Corrosion Tape System is the superior way to protect your deck equipment, hydraulics, steel pipes, flanges, valves, marine pilings and structures, or any other equipment which is subject to corrosion. Composed mainly of petrolatum and specific anti-corrosion agents, PetroWrap is formulated to provide economical long-term protection from water, salt, alkalis, and acids and requires no maintenance.

Can be applied on wire brushed surfaces. Repels water, salt, alkalis, and acids. Protects new or corroded surfaces. Withstands temperatures -40 oC to 65 oC. Will not crack, peel, or harden. Non-toxic and non-polluting.

IMPA CODE Width Length Rolls/Box
812471 50 mm (2”) 10 m (32.8 ft) 36
812472 100 mm (4”) 10 m (32.8 ft) 18
812473 100 mm (4”) 10 m (32.8 ft) 12
812474 200 mm (8”) 10 m (32.8 ft) 8

Applications

Remove all contaminants such as dirt, oil, scale, and excessive moisture. Brush PetroWrap Primer (A) evenly over surface to displace remaining moisture and ensure proper adhesion. Press PetroWrap Filler (B) into surface irregularities to eliminate air pockets. Wrap PetroWrap Tape (C) spirally around prepared surface using even tension. An overlap of 50% is recommend to assure total protection.

For industrial use

PetroWrap Anti-Corrosion Tape System is the superior way to protect steel pipes, flanges, valves, hydraulic lines and fittings, steel structures and any other equipment which is subject to corrosion. PetroWrap is a cold applied system, composed mainly of petrolatum and specific anti-corrosion agents. PetroWrap is specifically formulated to provide long term protection from water, salt, alkalis, acids, and requires no maintenance.

No special equipment required for application. Can be applied on wire brushed surfaces. Repels water, salt, alkalis, and acids. Can be applied on wet surfaces.

Protects new or corroded surfaces. Withstands temperatures -40 oC to 70 oC (-40 oF to 158 oF). Will not crack, peel, or harden. Non-toxic and non-polluting.

Conforms to AWWA Standards, C217-90.

Additional Information
Width Length Rolls/Box
50 mm (2’’) 10 m (32.8 ft) 36
100 mm (4’’) 10 m (32.8 ft) 18
150 mm (6’’) 10 m (32.8 ft) 12
200 mm (8’’) 10 m (32.8 ft) 8

Applications

Remove all contaminants such as dirt, oil, scale, and excessive moisture. Brush PetroWrap Primer (A) evenly over surface to displace remaining moisture and ensure proper adhesion. Press PetroWrap Filler (B) into surface irregularities to eliminate air pockets. Wrap PetroWrap Tape (C) spirally around prepared surface using even tension. An overlap of 50% is recommend to assure total protection.

  • Applications for Above Ground, Under Ground, or Under Water
  • Steel pipes, flanges and valves
  • Welded pipe joints
  • Cooling tower piping
  • Pipe crossings
  • Tank Bases
  • Water proofing and sealing
  • Fire Protection – Pipe and sprinkler systems
  • Electrical connection boxes
  • Cable Splices
  • Hydraulic pipes, valves and fittings
Physical Properties
Property AWWA Requirement Petro Wrap Tape Compliance with Standard
DIEECTRIC STRENGTH volts/mil 170 minimum 250 Yes
THICKNESS microns 1016 minimum 1100 Yes
BREAKING STRENGTH n/m 3940 minimum 7200 Yes
ELONGATION AT BREAK % 6 minimum 20
Category: