LINKEX TM PORTABLE FLUORESCENT LEADLAMP

Product Overview
The LinkEx™ Portable Fluorescent Leadlamp is suitable for a multitude of applications where a temporary light is required for extended periods of time and is CE marked to the ATEX Directive and IECEx Certified for safe use in Zones 1 and 2 potentially explosive gas, vapour, mist and dust atmospheres, where a T3/T4 temperature class permits.
Available with twin side by side forward facing, or quad back to back energy efficient fluorescent lamp combinations in a wide range of voltages (24V – 254V).
The leadlamps can be supplied with direct cable entries or fitted with ATX plugs/sockets to allow the units to be instantly linked in series (plug and play), allowing for quick and easy installation over a large area.
Rugged construction, and compact design allow lights to be connected together in the explosive atmosphere while energised.
Unistrut compatible mounting points on the lamps provide a flexible installation solution allowing them to be quickly and easily fixed in position on pipes, scaffold or a ferrous backdrop with magnetic fixings.
Accessories are available to provide a quick, easy and low cost solution for mounting the lamps.
Easy maintenance is a key feature of the LinkEx™ Portable Fluorescent Leadlamp, re-lamping is simple and quick using standard compact fluorescent lamps readily available from electrical retailers and the operation takes a few minutes and can be done by a competent electrical engineer.
The leadlamp is also certified to the ‘End of Life’ protection circuit ballast for enhanced safety, in accordance with HSE safety notice 8/05.
NSN Codes
6240-99-6672990 – LL540MOD

Features & Benefits
• ATEX and IECEx Certified for Zone 1 & 2 explosive gas and dust atmospheres
• Fitted with plugs and sockets to link in series
• Twin or quad lamp configuration
• Compact & robust design
• Wide voltage range 24V – 254V
• Uses standard compact fluorescent lamps for ease of maintenance
• Control ballast incorporates ‘End of Life’ protection circuit
• Integrated Unistrut compatible mounting points
• Emergency version available
• Industrial version available

Accessories
WOLF’S EXTENSIVE RANGE OF POSITIONING, MOUNTING AND PROTECTION ACCESSORIES, ENCOMPASSING FIXING KITS, FILMS AND CABLE MANAGEMENT, FOR THE LINKEX™ PORTABLE FLUORESCENT LEADLAMP (LL-500) GIVE WORKERS MORE SECURE TEMPORARY INSTALLATION SOLUTIONS FOR LIGHTING IN HAZARDOUS AREA WORKING ENVIRONMENTS.
Fixing Kits
The fixing kits give flexible and sturdy mounting and positioning options for temporary applications – putting the leadlamp exactly where it is needed.
• Magnet Kit – With magnet pads grip to ferrous metal surfaces.
• Universal Kit – With eye bolt and carabiner suspend horizontally or vertically from existing infrastructure.
• Tripod Kit – With fixing bar attach horizontally or vertically to tripod stand.
• Hanging Straps – With straps hang from existing infrastructure.

Tripods and Stands
For standalone leadlamp positioning, Wolf’s 4-Leg Stand gives optimum stability, allowing the cable entry and linking sockets to be ideally placed for linking in series and keep the lamp in a raised position away from any residue.
It is an ideal solution for the 4 x 36W lamp to provide 360° output in the centre of the working site.
In addition, the tripods give a stable platform allowing the leadlamp to be attached with the Tripod Kit and used at a variety of heights and positions to deliver vertical or horizontal forward facing light, in the horizontal position the light can be directed upwards, illuminating the work area from the underside.
The range ofTripod Stands available are lightweight, easily transportable, made from steel and will extend a lamp to a height of up to 3.2 metres to maximise light area coverage for workers.

Films / Cable Management
Not only is the positioning and mounting of leadlamps key to worker efficiency but also the protection of the tube from damage to ensure its longevity, in optimal condition, for repeat usage.
Wolf leadlamps are used regularly in blasting, jetting, coating and painting applications and are protected from residue build-up by the use of a Protective Film, easily replaced between uses to ensure the product is delivering maximum light output without obstructions.
Finally, to keep the working area free from potential trip hazards, cable can be managed using a Magnet Cable Tidy to elevate it from the ground along a ferrous metal surface.
If you require something different to suit a particular hazardous area need, whether a variation to our existing range or a totally new accessory for a unique application and environment, please contact us to discuss the development of a practical and safe accessory solution.

WOLF’S RANGE OF TRIPODS ARE LIGHTWEIGHT, EASILY TRANSPORTABLE AND WILL EXTEND A LAMP TO A MAXIMUM HEIGHT OF 3.2 METRES.
Once assembled a tripod gives a stable platform allowing the LinkEx™ LED Temporary Luminaires, Portable Fluorescent Leadlamps, LED Floodlites and XT Flood Bank Stands to be used at a variety of heights and positions.
The tripod allows the positioning of a lamp to deliver vertical or horizontal forward facing light or in the horizontal position the light can be directed upwards illuminating the work area from the underside.
Three models available:
• Lightweight – Steel (Black Painted) – max. height 1.85m
• Medium Duty – Steel (Plated) – max. height 2.4m
• Heavy Duty – Steel (Plated) – max. height 3.2m

A mounting bracket is required for the LinkEx™ LED Temporary Luminaire and Portable Fluorescent Leadlamp to attach to the tripod and position the lamp either horizontally or vertically.
An optional mounting bracket is available for the LinkEx™ LED Floodlites and XT Flood Bank Stands (for the Medium and Heavy Duty Tripods only) to attach to the lamp/tripod and facilitate an easy removal of the lamp for frequent positioning at ground level.