LEAK-TEK Detection Spray

The Leak-Tek leak detection spray is used to expose leaks and cracks in oxy/acetylene and oxy/propane gas equipment joints and connections. Once sprayed, ‘Leak-Tek’ will reveal even the smallest of leaks instantly.

Non oil-based solution, to prevent combustion hazard when used on pressurised oxy/fuel equipment setup.

Can be used on hoses, regulator nuts, flashback arrestors, shank valves, headnuts and other fittings to help detect leaks.  Solution will bubble on contact with leaking gas. CFC free, non-toxic and non-flammable.

  • Non-toxic
  • Completely bio-degradable
  • Non-flammable
  • Will not form combustible mixtures with other gases.
  • Non-corrosive
  • Sprays to give a low discharge milky liquid.
  • Environmentally Friendly – No CFCs.
  • All dried residues are completely water washable.

An oil-free non-toxic milky spray in a hard-wearing 400ml can. Use on hoses, regulator nuts, shank valves, headnuts etc.  Fill the pipes and spray the leak detector over the connections.  If the spray bubbles, there is a leak.
This product is not suitable for use with phosphorous or phosphorous compound gases, or on medical gases where ingress into the gas may occur.

  • Solution will bubble on contact with leaking gas.
  • Non-toxic milky spray in a 400ml can

  Non-toxic milky spray in a 400ml can. Non oil-based solution, to prevent combustion hazard when used on pressurised oxy/fuel equipment setup. Can be used on hoses, regulator nuts, flashback arrestors, shank valves, headnuts and other fittings to help detect leaks.  Solution will bubble on contact with leaking gas. CFC free, non-toxic and non-flammable.